Our 2000 Series "Reducer" Hose Ends make complex plumbing jobs easier.

Part Numbers and Sizes

AN Size Hose Size Part Number Black
8AN 6AN 220107 220107BL
10AN 8AN 220109 220109BL
16AN 12AN 220115 220115BL

Stainless braided hose can be abrasive to anything it comes in contact with. For that reason, Fragola Performance Systems offers it's hose with optional  plastic covers. The hose will not scratch aluminum panels or remove paint. The clear maintains the stainless braided look, while the black matches our most popular black anodized hose ends and adapters.

Sizes 6-12 AN feature a conductive PTFE core.

Part Numbers & Sizes

Size Cover Bulk Part Number 10 Foot Roll 20 Foot Roll
-3 Clear 600013 601013 602013
-3 Black 600023 601023 602023
-4 Clear 600014 601014 602014
-4 Black 600024 601024 602024
-6 Black 600026 601026 602026
-8 Black 600028 601028 602028
-10 Black 600029 601029 602029
-12 Black 600030 601030 602030

Technical Specifications

Part Number A-N Size Nominal I.D. OutsideDiameter Working Pressure Burst Pressure Min. Bend Radius
600013 -3 .125" .320" 3000 psi. 12000 psi. 3"
600014 -4 .187" .320" 3000 psi. 12000 psi. 4"
600023 -3 .125" .320" 3000 psi. 12000 psi. 3"
600024 -4 .125" .320" 3000 psi. 12000 psi. 4"
600026 -6 .312"" .505" 2500 psi. 10000 psi. 6.5"
600028 -8 .405" .580" 2000 psi. 8000 psi. 8.25"
600029 -10 .500" .685" 1500 psi. 6000 psi. 9.5"
600030 -12 .625 .805" 1200 psi. 4800 psi. 15"

481710BL

Description
Part Number
10 AN x 1/2" NPT Oil Pressure Adapter, 3.25" Long 481710BL

Description
Part Number
6 AN (9/16"-18) Male Cross, (X) Adapter, Black 900656BL

Our Hard-Line to AN Male Adapter Fittings are machined from 6061 Aluminum and Bright Dip Anodized for good looks and longevity.

Use these fittings to connect the bare end of a hard tube to an AN style fitting. Pressure tested to 150 psi.

Part Numbers & Sizes

Description Part Number(Black Only)  
-6 AN Male x 1/4" O.D. Tube 892004BL
-6 AN Male x 5/16" O.D. Tube 892005BL
-6 AN Male x 3/8" O.D. Tube 892006BL
-8 AN Male x 1/2" O.D. Tube 892008BL
-10 AN Male x 5/8" O.D. Tube 892010BL

Part Numbers for 25 Foot Rolls of aluminum tubing can be found here.

900656bl

 

 

 

 

 

 

 

 

 

 

Description
Part Number
6 AN Male Cross, “X” Adapter, Black 900656BL

Parker Push-Lok is the performance standard for a multitude of applications. It is manufactured to the same rigorous standards as all of Parker’s products. This hose performs well when used within the temperature and pressure parameters that it was designed for:

  • 250 psi. maximum pressure for most oil, water and fuel applications.
  • Temperature range –40° F to +212° F.

Synthetic rubber tube is covered with one layer of textile braid,combined with an outer layer of synthetic colored rubber. Sized in fractions and may be used with any push-on style fitting. Series 8000 Push Lite Race Hose Ends work well with this type of hose.

Part Numbers & Sizes

A-N Size Nom I.D. Bulk Per Ft. 10 Ft. Roll 20 Ft. Roll
Blue Black Blue Black Blue Black
-4 1/4" 860004 870004 861004 871004 862004 872004
-6 3/8" 860006 870006 861006 871006 862006 872006
-8 1/2" 860008 870008 861008 871008 862008 872008
-10 5/8" 860010 870010 861010 871010 862010 872010
-12 3/4" 860012 870012 861012 871012 862012 872012
-16 1" 860016 870016 861016 871016 862016 872016
-20 1-1/4" N/A 870020 N/A 871020 N/A 872020

Technical Specifications

Size

Nominal I.D.

Push-Lite Designation Max Burst Pressure Outside

Diameter

Vacuum Rating Weight Per Ft.
1/4" -4 250 psi. .520" 28 in. hg. 0.09 lbs.
3/8" -6 250 psi. .625" 28 in. hg. 0.11 lbs.
1/2" -8 250psi. 800" 28 in. hg. 0.18 lbs.
5/8" -10 250 psi. .885" 15 in. hg. 0.19 lbs.
3/4" -12 250 psi. 1.120" 15 in. hg. 0.24 lbs.
1" -16 175 psi. 1.320" 15 in. hg. .55 lbs.
1-1/4" -20 150psi. 1.550" 10 in. hg. .65 lbs

PLEASE NOTE:

On bulk lengths of hose over 20 feet, Fragola Performance Systems reserves the right to ship plus or minus 15% in length in order to reduce the number of unsaleable pieces in stock. If you need a specific length for your job, please notify your sales person of the minimum acceptable length.

Recommended for Motorsports applications, the black synthetic rubber core is resistant to oil, fuels, coolants, and alcohols.

  • 500 PSI working pressure covers most oil, water, and fuel systems you may encounter.
  • Reinforced with a single braid of bright corrosion resistant type 302 stainless steel wire braid.
  • Operating range of -40° F to +300° F.
  • Black Braided Nylon Cover makes this lightweight hose both durable and attractive.
  • Designed to be used with FPS Series 2000 Hose Ends, (pg. 3) and FPS Sport-Crimp Hose Ends (pg. 15)
  • This hose is not intended to be used with 3000 Series Hose Ends.

As a rule of thumb when selecting AN Hose to replace a given size automotive hose, the dash size is the nominal size 1/16”. Example –10, is 10/16” or 5/8” Automotive hose. The AN hose will be slightly smaller due to the thickness of the hose.

Part Numbers & Sizes

Desc. (In.) Hose I.D. Bulk Per Ft. 3 Ft. Roll 6 Ft Roll  10 Ft. Roll  15 Ft. Roll 20 Ft. Roll
#4 7/32 840004 840304 840604 841004 841504 842004
#6 11/32 840006 840306 840606 841006 841506 842006
#8 7/16 840008 840308 840608 841008 841508 842008
#10 9/16 840010 840310 840610 841010 841510 842010
#12 11/16 840012 840312 840612 841012 841512 842012
#16 7/8 840016 840316 840616 841016 841516 842016

Technical Specifications

Part Desc. (In.) Working Pressure Nominal I.D. Outside

Diameter

Vacuum Rating Min. Bend Radius Weight Per Ft.
840004 #4 500 .218" .440" 28 in. hg. 2.0 0.075
840006 #6 500 .343" .560" 28 in. hg. 2.5 0.095
840008 #8 500 .437" .670" 28 in. hg. 3.5 0.120
840010 #10 500 .562" .820" 28 in. hg. 4.0 0.155
840012 #12 350 .687" .960" 28 in. hg. 4.5 0.250
840016 #16 350 7/8" 1.15" 28 in. hg. 5.5 0.320

PLEASE NOTE:

On bulk lengths of hose over 20 feet, Fragola Performance Systems reserves the right to ship plus or minus 15% in length in order to reduce the number of unsaleable pieces in stock. If you need a specific length for your job, please notify your sales person of the minimum acceptable length.

Introducing Fragola’s new line of aluminum, reusable, hose ends for PTFE hose. Our Real Street hose ends are a direct fit for our PTFE hose and eliminate the permeation issues common with aftermarket racing hose. A unique “double-swivel” design allows for clocking adjustment after installation.

 

Fragola's Real Steet reusable hose ends for PTFE hose.

A-N Size
Part Number
-4 680454BL *Forged Only
-6 684506BL
-8 684508BL
-10 684510BL
-12 684512BL

 

Part Numbers for replacement olives can be found here.

Introducing Fragola’s new line of aluminum, reusable, hose ends for PTFE hose. Our Real Street hose ends are a direct fit for our PTFE hose and eliminate the permeation issues common with aftermarket racing hose. A unique “double-swivel” design allows for clocking adjustment after installation.

 

Fragola's Real Steet reusable hose ends for PTFE hose.

A-N Size
Part Number
-4 689904BL (Forged Only)
-6 689006BL
-8 689008BL
-10 689010BL
-12 689012BL

 

Part Numbers for replacement olives can be found here.