Special Tools & Accessories
 


Vice Jaws

These magnetized aluminum vice jaws will hold your fittings securely during assembly. Fits most vices with 3" jaws.
 
900061 Fits most vises with 3" jaws


37° Flaring Tool
The A-N specification calls for a 37° JIC flare in order to seal hard line tubing on the flare of the matching adapter. This economical flaring tool works on 3/16" through 5/8" diameter tubing. The faceted, hard chrome-finished cone rolls out a perfect flare and burnishes the surface at the same time. Large handle gives excellent leverage.
 
900500 For 3/16"-5/8" Diameter Tubing

 


Teflon Tape

900063 1/4" X 43'


Lever Tubing Benders
Open slide slips over the tube at any point. Makes smooth, tight radius bends up to 180 degree with minimum effort. Does not score or flatten the tubing.
3/16" & 14" Lever Tubing Benders
900501 3/16" Hard Line Bender
900502 1/4" Hard Line Bender


 

 

#3 & #4 P.T.F.E
Braid Spreader

This handy tool makes it a snap to open up the braiding in order to seat the "olive" over the P.T.F.E liner on #3 & #4 hose. This tool can also be used to flush up against the end of the hose before continuing the installation of reusable hose ends.

 
#3 & #4 PTFE Braid Spreader
900065 For #3 & #4 Hose

Koul Tool
This handy composite device make installing the socket over the cut end of the stainless hose a breeze. Simply open the clamshell, insert the socket, clamp the Koul Tool in a vise, or secure with Vise-Grip pliers. Push the hose through the opening with a twisting motion, and the hard part of hose assembly is done. Three sizes in a box, and they fit all brands of A-N fittings.

900510 Fits -4, -6 & -8
900511 Fits -10, -12 & -16


Double Open End Wrench Set
Manufactured from heat treated aluminum, for the best compatibly with aluminum fittings. Perfect for tightening A-N hose ends in confined spaces. Wrenches have two different angles on the openings for ease of use. These wrenches come drilled for storage on a rack, thus freeing up space in tool box. Sold in sets of five and individually.

Double Open End Wrench Set
900084 -4 Double Open End Wrench
900086 -6 Double Open End Wrench
900088 -8 Double Open End Wrench
900090 -10 Double Open End Wrench
900092 -12 Double Open End Wrench
900096 -16 Double Open End Wrench
900098 -20 Double Open End Wrench
900100 Set of 5 -6 through -16



A-N Wrench Set
Manufactured from heat-treated aluminum, this set is the best insurance against marring the finish of your  Fragola Performance Systems fittings during assembly. Custom short handle also helps against over-torquing. Sold in sets of five, and also available separately.

A-N Wrenches

900006 -6 Wrench
900008 -8 Wrench
900010 -10 Wrench
900012 -12 Wrench
900016 -16 Wrench
900050 Five Piece Wrench Set

 

Hand Held Hose Shear
There are a number of methods for cutting the stainless braided hose, but the quickest and easiest is the hand held hose shear. With one stroke, hose up to -12 can be cut quickly and cleanly. Some braid strands may need additional clipping with side cut wire pliers. NOTE: Not  all types of hose, as some multi-layer hose like power steering hose may be too thick or tough.
 
900062 Hand Held Hose Shear

 

 

 


Hose Test Kit
This economical pressure test kit is a must for every toolbox. It allows the quick testing of your -3 through -16 hose assemblies. A compressed air source is needed to pressurize the hose, plus a water bath to submerge and check for leaks.

INDIVIDUAL LINE TESTERS
(Tests sing hose assembly.)
900063 -3
900664 -4
900666 -6
900668 -8
900670 -10
900672 -12
900676 -16
900060 Complete Kit

Back ] Next ]

Site designed by Advanced Web Designs