STRAIGHT HOSE ENDS Flare Size Part Number Black Clear Plain -4 100104 100104BL 100104CL 100404PL -6 100106 100106BL 100106CL 100106PL -8 100108 100108BL 100108CL 100108PL -10 100110 100110BL 100110CL 100110PL -12 100112 100112BL 100112CL 100112PL -16 100116 100116BL 100116CL 100116PL -20 100120
	Straight Banjo Hose Ends   Banjo Bolts   30° Hose Ends Hose Size Part #   Part # Thread   Hose Size Part # -4 100004   3111104 (7/16-20)   -4 N/A -6 100006   3111106 (9/16-18)   -6 103006 -8 100008   3111108 (3/4-16)   -8 103008 -10 100010   3111110 (7/8-20)   -10 103010 -12 100012   3111112 (1 1/16-12)   -12 103012 -16 100016   3111116 1 5/16-12)
	45° HOSE ENDS-BENT TUBE Flare Size Part Number Black Clear Plain -4 104504 104504BL 104504CL 104504PL -6 104506 104506BL 104506CL 104506PL -8 104508 104508BL 104508CL 104508PL -10 104510 104510BL 104510CL 104510PL -12 104512 104512BL 104512CL 104512PL -16 104516 104516BL 104516CL 104516PL
	45° HOSE ENDS LOW PROFILE HOSE SIZE PART NUMBER -6 104606 -8 104608 -10 104610 -12 104612 -16 104616 -20 104620
	60° HOSE ENDS BENT TUBE HOSE SIZE PART NUMBER -6 106006 -8 106008 -10 106010 -12 106012 -16 106016

Congratulations on buying the finest A-N hose ends ever made! Please be sure to properly assemble the hose and fittings. You can find the complete instructions on Page 34 of the catalog.

When plumbing your vehicle or boat, be certain to route the hoses as far away from heat sources like the exhaust system, as possible. Secure your lines at various intervals in order to prevent them from moving.

A few drops of regular motor oil on the threads of any adapter will make installation and removal of the hose end easier. The seal of the hose end is made by the contact with the 37 degree flare. Be careful not to over-torque the hose end when installing the adapter. Please refer to the torque specifications on page 3 of the catalogue.

A word about anodizing..At Fragola Performance Systems, we use a process called "Brite-Dip", but the anodizing process is not an exact science like painting or plating. The colors will vary from batch to batch, plus the sun, heat, & time will all cause some fading. Various alloys of aluminum will anodize with different hues.