Pro-Crimp Professional Race Hose

This will be "state-of-the-art" for years to come!

Telefex, a major manufacturer of PTFE-lined hose, has teamed  with Fragola Performance Systems to manufacture and market this phenomenal new hose designed specifically for racing.

  • The hose is made up of three distinct layers optimized for long life with the lightest weight advantage. The liner is made of oversized convoluted P.T.F.E material. The convoluted design allows excellent flexibility and very tight bend radius.
  • The second layer is a non-absorbent ceramic material that acts as a heat barrier both to the fluid inside, and to the ambient under-hood air temperatures. NEEDS NO EXTRA FIRE SLEEVE!*
  • The Pro-Crimp Race hose is available with two different, yet distinctive outer braids.
Pro-Crimp I
The lightest possible hose  assembly, Pro-Crimp I is finished with an aramid fiber textile braid that has the same properties on Nomex and Kevler.
Part Number A-N Size Weight Per Ft. Vacuum Rating Maximum Pressure Heat Block Fitting Pull Off Min. Bend Radius
2000006 -6 0.096 28 in. hg. 1250 psi. 60%+ 1400 lbs. 2.5"
2000008 -8 0.140 28 in. hg. 1000 psi. 60%+ 1400 lbs. 3.5"
2000010 -10 0.154 28 in. hg. 750 psi. 60%+ 1000 lbs. 4.0"
2000012 -12 0.20 28 in. hg. 500 psi. 60%+ 750 lbs. 4.5"
2000016 -16
(No Specs available)

3000000  Factory Crimp & Pressure Test


*
The S.A.E test J1527, sec. 6, where the external hose surface temps of 1200F, the fuel inside remained below 500
°F with no rupture for over 5 minutes.

 

Pro-Crimp II
Many racing associates mandate stainless braided hose for fuel line applications, and Pro-Crimp II fits that bill. Manufactured with the same liner and ceramic heat barrier, the hose is wrapped with a distinctive stainless outer braid.
Part Number A-N Size Weight Per Ft. Vacuum Rating Max Pressure Heat Block Fitting Pull Off Min. Bend Radius
2100008 -8 0.186 28 in. hg. 1000 psi. 60%+ 1400 psi 3.5"
2100010 -10 0.220 28 in. hg. 750 psi. 60%+ 1000 psi 4.0"

3000000  Factory Crimp & Pressure Test


To purchase your own crimp machine and dies, see page 45.

Back ] Next ]

Site designed by Advanced Web Designs