Steel Brake Adapters
 
Brake Adapters facilitate the connection of -3 & -4 P.T.F.E-lined hose to most popular calipers and wheel cylinders Tubing Adapters connect the -3 & -4 P.T.F.E lined Hose to the hard lines mounted on the vehicle. Tubing adapters have the slot for the O.E.M clip (not provided). Renew your fluid Banjo Bolts with new ones from Fragola Performance Systems. Available in most popular thread combination.

Steel Brake Adapter

650301 -3 X 10MM 1.25 I.F.
650302 -3 X 3/8 - 24 I.F.
650303 -3 X 7/16-20
650304 -3 X 7/16-24
650305 -3 X 1/2-20 I.F
650306 -3 X 9/16-18 I.F.
650307 -3 X 10MM X 1.0 I.F.
650308 -3 X 10MM X 1.5
650309 -3 X 9/16-20 Chrysler M/C
650310 -3 X 10MM X 1.0 B.F
650311 -3 X 10MM X 1.5 B.F
   
650401 -4 X 10MM X 1.25 I.F.
650402 -4 X 3/8 - 24 I.F.
650403 -4 X 7/16-20
650404 -4 X 10MM 1.5 I.F.
650405 -4 X 1/2-20
650406 -4 X 9/16-18
650407 -4 X 10MM X 1.0

Steel Tubing Adapter

650201 -3 X 3/8-24 I.F.
650202 -3 X 10MM X 1.0 I.F.
650203 -3 X 10MM X 1.25 I.F.
650204 -3 X 7/16-24 I.F.
650205 -3 X 10MM X 1.0 B.F.
650206 -3 X 1/8 FPT
   
650207 -4 X 1/8 FPT
650221 -4 X 3/8-24 I.F.
650222 -4 X 10MM X 1.0 I.F.
650223 -4 X 10MM X 1.25
650224 -4 X 7/16-24
650225 -4 X 10MM X 1.0 B.F.

Steel Banjo Bolt

650150 3/8 - 24
650151 7/16 - 20
650152 10MM X 1.25
650153 10MM X 1.5
650154 7/16 - 24
650155 10MM X 1.0
650156 1/20-20 Chryler M-C
650157 9/16-20 Chryler M-C
 

Steel Brake Adapter to Hose

650601 -3 Hose End X 3/8 - 24 Male
650602 -3 Hose End X 10 X 1.25 Male
650603 -3 Hose End X 7/16-20 Male
650604 -3 Hose End X 7/16 - 24 Male
650605 -3 Hose End X 1/2 - 20 Male

NOTE:
I.F. = Inverted Flare
B.F. = Bubble Flare

 

Steel Tubing Adapter to Hose

650501 -3 Hose End X 3/8-24 I.F.
650502 -3 Hose End X 10 X 1.0 I.F.
650503 -3 Hose End X 10 X 1.25
650504 -3 Hose End X 7/16-24
650505 -3 Hose End X 10 X 10 X 1.0 B.F.
650506 -3 Hose End X -3 Bulkhead

Banjo Adapters allow easy installation of P.T.F.E lined brake lines where space is at a premium. A 3/8" banjo adapter may be used for any 10mm application. Seals with two crush washers (not included).

Steel Banjo Adapter

650103 -3 X 3/8
650104 -4 X 3/8
650113 -3 X 7/16
650114 -4 X 7/16
650123 1/8 FPT X 1/2 Chrysler M/C
650124 1/8 FPT X 9/16 Chrysler M/C
Bolt Down Tee
599913 3/8-24 On the Side (Uses a 650302  And Seals With A Crush washer)

X 3/16 I.F. On the Run
(Use 650302 which seals on the I.F.)

Inline Tee for Brake Light Switch
599903 -3 Tee 1/8 FPT On the Side

Replacement crush washers can be found on page 38.

Back ] Next ]

Site designed by Advanced Web Designs