Series 8600-8700 Parker Push-Lok General Purpose Hose

Parker Push-Lok is the performance standard for a multitude of applications. It is manufactured to the same rigorous standards as all of Parker’s products. This hose performs well when used within the temperature and pressure parameters that it was designed for:

  • 250 psi. maximum pressure for most oil, water and fuel applications.
  • Temperature range –40° F to +212° F.

Synthetic rubber tube is covered with one layer of textile braid,combined with an outer layer of synthetic colored rubber. Sized in fractions and may be used with any push-on style fitting. Series 8000 Push Lite Race Hose Ends work well with this type of hose.

Part Numbers & Sizes

A-N Size Nom I.D. Bulk Per Ft. 3 Ft. Roll 6 Ft. Roll 10 Ft. Roll 15 Ft. Roll 20 Ft. Roll
Blue Black Blue Black Blue Black Blue Black Blue Black Blue Black
-4 1/4" 860004 870004 863004 873004 866004 876004 861004 871004 861504 871504 862004 872004
-6 3/8" 860006 870006 863006 873006 866006 876006 861006 871006 861506 871506 862006 872006
-8 1/2" 860008 870008 863008 873008 866008 876008 861008 871008 861508 871508 862008 872008
-10 5/8" 860010 870010 863010 873010 866010 876010 861010 871010 861510 871510 862010 872010
-12 3/4" 860012 870012 863012 873012 866012 876012 861012 871012 861512 871512 862012 872012
-16 1" 860016 870016 863016 873016 866016 876016 861016 871016 861516 871516 862016 872016
-20 1-1/4" N/A 870020 N/A 871020 N/A 872020

Technical Specifications

SizeNominal I.D. Push-Lite Designation Max Burst Pressure OutsideDiameter Vacuum Rating Weight Per Ft.
1/4" -4 250 psi. .520" 28 in. hg. 0.09 lbs.
3/8" -6 250 psi. .625" 28 in. hg. 0.11 lbs.
1/2" -8 250psi. 800" 28 in. hg. 0.18 lbs.
5/8" -10 250 psi. .885" 15 in. hg. 0.19 lbs.
3/4" -12 250 psi. 1.120" 15 in. hg. 0.24 lbs.
1" -16 175 psi. 1.320" 15 in. hg. .55 lbs.
1-1/4" -20 150psi. 1.550" 10 in. hg. .65 lbs

PLEASE NOTE:

On bulk lengths of hose over 20 feet, Fragola Performance Systems reserves the right to ship plus or minus 15% in length in order to reduce the number of unsaleable pieces in stock. If you need a specific length for your job, please notify your sales person of the minimum acceptable length.